Products

Disc brushes

Disc brushes are round brushes that run on a shaft or mounting. They are used for deburring, cleaning and light surface finishing, as a single disc or in a pack.

Line drawing of a disc brush with a hub and radial filaments.

Typical applications

  • Deburring and finishing edges or surfaces
  • Cleaning discs, plates and rotating parts
  • Surface finishing in a machining or assembly station
  • Used as a single disc or as a set side by side on one shaft

If your application is not listed verbatim, still send the existing brush. We will work out the specification from the dimensions and the use.

Specification parameters

For a usable quote we need at least the information below. If a dimension is missing, a clear photo with a measuring tape in the frame often gets us most of the way there.

ProfileThe shape and size of the backing, body or mounting (for example a metal U-channel on a strip brush).
HeightBrush height, usually measured from the bottom of the profile or core to the tip of the filament.
FillPP (polypropylene), PA6 (polyamide 6), PA6.12 (polyamide 6.12), steel wire or horsehair — or another fill if that is what the existing brush uses.
DiameterThe outside diameter of the brush, to the tip of the filament.
Bore or mountingThe hole, shaft size or other mounting in the centre.
Thickness / packThe thickness of one disc, and whether several discs sit side by side.

The right fill depends on the application, the load and the environment (for example moisture, heat, or food production). We advise on the basis of the existing brush and its use; we do not claim a standard choice without that context.